skip to Main Content

Type EB and EB-E

EndBeams

Our EndBeams are hand-hewn beams with a cutout that perfectly fits your wall cladding. Just like our eLbowBeams you get an original reclaimed wood beam, hand-hewn, kiln-dried and brushed.

Our EndBeams are available either in  spruce/fir/pine, Type EB or solid oak, Type EB-E. Please select your preferred wood type in the form below.

The perfect wallcover to fit to your EndBeams can be found here.

Endbeam
Endbeam
Description EndBeam EB
Wandverkleidung Mit Abschlussbalken Aus Altholz
Endbeam
Wood Beam Endbeam
Wandverkleidung Aus Alten Eichen Brettern
Wandverkleidung Aus Alten Eichen Brettern
Wandverkleidung Mit Abschlussbalken Aus Altholz
Wandverkleidung Mit Abschlussbalken Aus Altholz
EndBeam EB Hand Hewn Beams

Our EndBeams give the perfect finishing touch for reclaimed wood wallcovers. Handling and assembly is super easy due to the low weight, but the effect will be elegant and effective.

GET YOU INDIVIDUAL OFFER HERE

  • Type of wood: spruce/fir/pine or solid oak
  • Colours: mixed shades
  • Thickness: about 7cm, sawn on the back
  • Widths: about 10/12 – 16 / 18cm
  • Lengths: 0.5-6.0m
  • Section: approx. 4 or 5cm x 3cm
  • Brushed & kiln-dried

We always produce order to order. After your payment has been received, we will start producing your order. In this way we can guarantee that we always deliver exactly what you need for your project. You will receive the planned delivery time in your offer or in your order confirmation.

Thats excactely right! Sunburnt Boards, for example are sometimes really old (50-150 years), sometimes it only takes 20-40 years until they are weathered/sunburnt enough.

Handhewn wood – on the other hand side – can’t be any younger than approx. 100 years, since it‘s typical surface was done by hand & axe, when machines where not available.

Original hand-chopped wood (beams and hand-chopped boards) come from the time when there were no machine saws (sawmills / frame saws …). The round tree trunks were chopped into lumber by hand and ax into the square shape. That was the case until about 100 years ago, sooner or later depending on the region.

With the special “kiln-dried” version, the waste wood is “dried” for several days in a drying chamber at over 60 ° C, thus preventing insecticide infestation in the delivery condition. It is an environmentally friendly form of pest control.

However, we ask for your understanding that after this point in time, a possible new infestation is beyond our control and therefore cannot be ruled out.We therefore recommend preventive treatment against renewed worm infestation.

The surface of the old wood is processed with a rotating brush head. As a result, soft wooden parts are released from the surface, the hard components remain and define a structured surface.


 

 

 

 

 

 

 

 

 

 

 

 

 

 

Back To Top